!
!
!

A Michel

Set includes 2 x down tube (150 mm x 26 mm), 2 x head badge,1 for head,1 for seat tube  (30 mm x 27 mm). Little know French producer, seen here in gold

Banesto TVT

Digitally re-produced and printed onto quality vinyl. Not strictly Spanish as TVT is a French company, but famously ridden to many victories by none other than Big Mig (Miguel Indurain).

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Banesto TVT V2

Digitally re-produced and printed onto quality vinyl. Not strictly Spanish as TVT is a French company, but famously ridden to many victories by none other than Big Mig (Miguel Indurain).

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Larger picture

Bertrand

Bertin V1

Digitally re-produced and printed onto quality vinyl. Set includes 2 x down tube 1 x seat tube (2 x vertical names plus worlds stripes at each end). Other colours may be available. info@wanit.co.uk

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Bertin V2

Digitally re-produced and printed onto quality vinyl. Set includes 2 x down tube 2 x seat tube, 4 x worlds stripes. Other colours may be available. info@wanit.co.uk

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Larger picture

Gitane classic

Set includes 2 x seat tube (245 mm x 20 mm), 2 x down tube (183 mm x 15 mm), 1 x head badge (58 mm x 49 mm)
Larger picture

Gitane v 2

Set includes 2 x seat tube (227 mm x 25 mm), 2 x down tube (181 mm x 20 mm), 1 x head badge (58 mm x 49 mm)

Gitane (digital)

Digitally re-produced and printed onto quality vinyl. Set includes 2 x down tube 2 x seat tube, 2 x forks, 2 x top tube, 1 x head, plus made in France. Other colours may be available. info@wanit.co.uk

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Gitane (digital) V2

Digitally re-produced and printed onto quality vinyl. Set includes 2 x down tube 2 x seat tube, 2 x forks, 2 x top tube, 1 x head, plus made in France. This design is in orange with white edges. info@wanit.co.uk

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Lapierre Classic

Set includes 2 x down tube (110 mm x 30 mm), 2 x seat tube (110 mm x 30 mm), 2 x forks (23 x 30 mm), 1 x head (41 x 50 mm). The head badge is a solid colour with the design picked out in relief and will show the frame colour through. As seen on older steel frames dating from the late 80's and early 90's.
Larger picture

Look

Set includes 2 x seat tube (184 mm x 25 mm), 2 x down tube (221 mm x 30 mm), 4 x small horizontals (110 mm x 15 mm)

LOOK TVT carbon (early) French

There were several versions of this one depending on year and what country the bike was destined for. This is the French version from I believe early 1986? Set comprises of 2 x down tube (handed), seat tube, and head (plus spare), 2 x TVT fork decals. Seen here on a silver background (not included)

 

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

Larger picture

LOOK KG86 (Digital)

Full set as seen on Look bikes during the reign of Bernard Hinault. For more information:  info@wanit.co.uk

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

LOOK KG86 2000 (Digital)

Full set as seen on Look bikes during the reign of Bernard Hinault. Can be supplied in French version lettering. For more information:  info@wanit.co.uk

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

LOOK KG96 (Digital)

1989 : KG 96 and the debuts of Jalabert

The KG 96 marks the turning of a technological corner: until then, LOOK frames had been made from tubes designed by TVT (the leader in tube composites at the time). With the KG96, LOOK developed its own blowing technology, created with the help of a Platilon, a flexible "pocket" inside the tubes. The carbon piece is inserted into a mould; after it is closed, the Platilon is inflated under high pressure and flattens the carbon piece against the walls of the mould. This technique enables better resistance to be gained, and the weight to be decreased, and is still used for the creation of certain pieces. Ceramic fibres were also used in the KG96 to strengthen the braid made from carbon and kevlar.

This new-generation frame had exceptional tension, rigidity and lightness for the time. It was quickly adopted by professional teams Toshiba and Once, with whom a young up-and-coming Frenchman cut his teeth: a certain Laurent Jalabert. In 1992, the rising star of French cycling was 2nd in the World Road Championships, riding the KG96. It was the beginning of a long collaboration between the Champion and the Nevers brand, a collaboration which goes on today.

Full set as seen on Look bikes during the reign of Laurent Jalabert. For more information:  info@wanit.co.uk

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Mavic frame kit V1

Digitally printed onto quality 70 micron vinyl. Set includes 2 x forks, 2 x chainstay, 2 x top tube.
Larger picture

MBK

Set includes 2 x seat tube (129 mm x 30 mm), 2 x down tube (86 mm x 32 mm), 2 x top tube (109 mm x 26 mm).

Peugeot px 10 (Digital)

Digitally re-mastered Peugeot frame decals. I've seen several versions of this design, some with the world champions bands (possibly in honour of Tom Simpson?) and others with the checker board and stripes design. In this case, I have included both designs, you chose!

Set includes 2 x down tube (190 x 20 mm), 1 x head (43 x 44 mm), 1 x seat (full design as shown 192 x 90 mm, worlds stripes can be replaced with alternative checker board/stripes), 2 x checker board/stripes designs (90 x 42 mm). I may also be able to supply tubing badge (subject to availability). For more information:  info@wanit.co.uk

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Larger picture

Peugeot

Set includes 2 x down tube (231 mm x 20 mm), 2 x seat tube (185 mm x 16 mm), 2 x head/seat badge (45 x 49 mm).
Larger picture

Rondinella

Larger picture

Time

Set includes 2 x seat tube (163 mm x 40 mm), 4 x other (102 mm x 25 mm), 1 x head (mirrored) 81 x 41 mm.
Larger picture

Vitus

Set includes 2 x seat tube (120 mm x 30 mm), 2 x down tube (120 mm x 25 mm), 2 x top tube (80 mm x 25 mm), 4 x small verticals (15 mm x 70 mm)

Vitus 992 Lotto team

Digitally re-mastered Vitus 992 Lotto team issue frame decals. As seen on bikes ridden by the likes of  Hendrick Redant and Johan Museeuw

Set includes, top tube, seat tube, down tube, forks, chainstays, head tube. Team colours only. Seen here on a red background which is not included.

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Vitus 992 multi

Digitally re-mastered and printed onto quality vinyl. Set includes 2 x top tube, 2 x seat tube (held in place on 1 piece of application tape), 2 x forks, 3 x tubing decals.

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Vitus 992 ovoid

Digitally re-mastered and printed onto quality vinyl. Set includes 2 x top tube, 2 x down tube, 2 x forks, 3 x tubing decals, 2 x Ovoid. See additional pictures for layout.

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

Please note: the colour of this version is a lime green (as shown in my pictures) and was taken from an original purple anodised frame. I have been informed that there may be other colours produced by Vitus, but I am not aware of any. If you do require the more 'yellow' version, then you must request this as I cannot accept returns based on wrong colour.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Vitus 979 (split lettering)

Seen on several Vitus frames from the 80's, with two tubing sets to choose from. Available in white, black, royal blue or olympic blue.

Vitus 979 (split lettering) no tubing decals

Seen on some Vitus frames from the 80's, set includes 2 x top tube, 1 x seat tube. Available in blue or white.

Vitus 979 Kas (Digital)

Full set as seen on Vitus bikes during the reign of 'king Kelly', including graduated print of Vitus logo. For more information:  info@wanit.co.uk

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Vitus 979 Kas (Digital) Yellow lettering

Have to say that I have not actually seen this version in the flesh, but have now had several requests for this set, but with yellow top tube lettering. For more information:  info@wanit.co.uk

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

VitusPlus Carbone 3 Kas

Full set including Mavic decal set of era, as seen on some Vitus bikes during the 80's and early 90's when carbon was becoming popular. This version features the VitusPlus Carbone 3 top tube decals in white. Seen here on a light blue background (not included) For more information:  info@wanit.co.uk

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Vitus 979 Carbone 9 Kas V1

Full set including Mavic decal set of era, as seen on some Vitus bikes during the 80's and early 90's when carbon was becoming popular. This version features the Vitus top tube decals in yellow with no black edging and the 'peloton' is in blue and yellow. For more information:  info@wanit.co.uk

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Vitus 979 Carbone 9 Kas V2

Full set including Mavic decal set of era, as seen on some Vitus bikes during the 80's and early 90's when carbon was becoming popular. This version features the Vitus top tube decals in yellow with a black edge and the 'peloton' is in black and yellow.For more information:  info@wanit.co.uk

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Vitus 979 (Digital) V2 Kit

Over the years, I have noticed that Vitus (as with many other builders) used a variety of decals on theie frames. I have some, but probably not all!

Set includes 2 x top tube (178 mm x 21 mm), 1x seat tube (125 mm x 26 mm), I head (85 x 19 mm), plus tubing decals. 

Vitus 980

Very rare Vitus 980 steel frame, set includes 2 x down tube (170 x 24 mm), 2 x seat tube (170 x 24 mm), 1 x tubing decal, 2 x fork decals.
Larger picture

Vitus 992 (Digital)

As seen on Vitus frames from the 80's and 90's. Many different colour combinations available, if your choice is not listed here, please cotact me at info@wanit.co.uk

Vitus 992

Set includes 2 x top tube (240 mm x 24 mm), 2 x down tube (220 mm x 20 mm).

Vitus Carbone + 7

Set includes 2 x top tube, 2 x seat tube, plus bonus tubing decals for seat tube and forks