!
!
!

Notar F Classic

Set includes 2 x down tube (120 mm x 20 mm), 2 x seat tube (140 mm x 23 mm), 1 x head (46 x 42 mm). The head badge is a printed and is the same colour for all choices..

Peugeot px 10 (Digital)

Digitally re-mastered Peugeot frame decals. I've seen several versions of this design, some with the world champions bands (possibly in honour of Tom Simpson?) and others with the checker board and stripes design. In this case, I have included both designs, you chose!

Set includes 2 x down tube (190 x 20 mm), 1 x head (43 x 44 mm), 1 x seat (full design as shown 192 x 90 mm, worlds stripes can be replaced with alternative checker board/stripes), 2 x checker board/stripes designs (90 x 42 mm). I may also be able to supply tubing badge (subject to availability). For more information:  info@wanit.co.uk

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Peugeot

Set includes 2 x down tube (231 mm x 20 mm), 2 x seat tube (185 mm x 16 mm), 2 x head/seat badge (45 x 49 mm).

Puch

Set includes 2 x down tube (115 mm x 30 mm), 1 x seat tube (158 mm x 28 mm), 1 x head badge (55 x 55 mm).

Rondinella

Time

Set includes 2 x seat tube (163 mm x 40 mm), 4 x other (102 mm x 25 mm), 1 x head (mirrored) 81 x 41 mm.

Vitus

Set includes 2 x seat tube (120 mm x 30 mm), 2 x down tube (120 mm x 25 mm), 2 x top tube (80 mm x 25 mm), 4 x small verticals (15 mm x 70 mm)

Vitus Argal

Set includes 2 x top tube (217 x 20.5 mm), 2 x Argal (123 x 18 mm). Optional printed chainstay protector

Vitus 979 France Loire (Digital)

As seen on Vitus 979 frames from the 80's, most notable rider being Sean Kelly. These are a full white panel wrap design with the detail printed on. If you frame has bottle eyes brazed on you may need to punch a hole for the upper eye to be able to wrap the design correctly, as the surface needs to be smooth, although a customer tells me that the panel will fit between the down tube bosses and the upper bottle cage eye (size 56 cm), so maybe not a problem. If this is not something you can do, I can produce these in individual parts to be applied after the white panel is painted in (as the originals) see extra picture to show this.

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

Vitus 979 France Loire + head (Digital)

As seen on Vitus 979 frames from the 80's, most notable rider being Sean Kelly. These are a full white panel wrap design with the detail printed on. If you frame has bottle eyes brazed on you may need to punch a hole for the upper eye to be able to wrap the design correctly, as the surface needs to be smooth, although a customer tells me that the panel will fit between the down tube bosses and the upper bottle cage eye (size 56 cm), so maybe not a problem. If this is not something you can do, I can produce these in individual parts to be applied after the white panel is painted in (as the originals) see extra picture to show this.

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

Vitus Futura (Digital)

Over the years, I have noticed that Vitus (as with many other builders) used a variety of decals on these frames. I have some, but probably not all!

Seen here in yellow with a black outline. Set includes 2 x top tube (200 mm x 19 mm),  with choice of tubing decals. 

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

Vitus 979 (split lettering)

Seen on several Vitus frames from the 80's, with two tubing sets to choose from. Available in white, black, royal blue or olympic blue.

Vitus 979 (split lettering) no tubing decals

Seen on some Vitus frames from the 80's, set includes 2 x top tube, 1 x seat tube. Available in blue or white.

Vitus 979 V1 (Digital)

Over the years, I have noticed that Vitus (as with many other builders) used a variety of decals on these frames. I have some, but probably not all!

Set includes 2 x top tube (178 mm x 21 mm), 1x seat tube (125 mm x 26 mm), I head (85 x 19 mm), plus tubing decals. 

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

Vitus 979 V2 (Digital)

Over the years, I have noticed that Vitus (as with many other builders) used a variety of decals on these frames. I have some, but probably not all!

Set includes 2 x down tube (180 mm x 40mm), 1x seat tube (177 mm x 30 mm), I head (45 x 49 mm), plus tubing decals. Seen here in white/black with gold outlines

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

Vitus 979 V3 Digital

Over the years, I have noticed that Vitus (as with many other builders) used a variety of decals on these frames. I have some, but probably not all!

Set includes 2 x down tube (157 mm x 28 mm), 1x seat tube (154 mm x 30 mm), I head (45 x 41 mm), plus tubing decals. and coloured bands which wrap around the frame at either end of the down tube decal (see pictures).This is a very rare set, I have only seen 1 frame like this, the tubing decal appears from the 992, but with 979 lettering. Seen here in gold with white outlines and black infils.

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

Vitus 979 V4 Digital

Over the years, I have noticed that Vitus (as with many other builders) used a variety of decals on these frames. I have some, but probably not all!

Set includes 2 x down tube (157 mm x 28 mm), 1x seat tube (154 mm x 30 mm), I head (45 x 41 mm), plus tubing decals. and coloured bands which wrap around the frame at either end of the down tube decal (see pictures).This is a very rare set, the tubing decal is different from most others I have seen and is in shades of metallic silver, the forks are from the 992, but with 979 lettering. Seen here in gold with white outlines and black infils.

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

Vitus 979 V5 (Digital)

Over the years, I have noticed that Vitus (as with many other builders) used a variety of decals on these frames. I have some, but probably not all!

Set includes 2 x down tube, joined by centre decal as 1 piece (158 mm x 56mm), 1x seat tube (162 mm x 29 mm), I head (37 x 57 mm), 4 x multi colour chevrons (72 x 15 mm), 2 x small horizintal Vitus (90 x 19 mm), plus tubing decals. 

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

Vitus 979 V5 (Digital) Down tube only

Over the years, I have noticed that Vitus (as with many other builders) used a variety of decals on these frames. I have some, but probably not all!

Set includes 2 x down tube, joined by centre decal as 1 piece (158 mm x 56mm)

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

Vitus 979 Kas (Digital)

Full set as seen on Vitus bikes during the reign of 'king Kelly', including graduated print of Vitus logo. For more information:  info@wanit.co.uk

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Vitus 979 Kas (Digital) V2

Full set as seen on Vitus bikes during the reign of 'king Kelly'. This version features the 'split' lettering for the top tube, full panel seat tube and down tube, forks, head, chainstays, 979 tubing decals. Seen here on a blue background (not included) to show split lettering and full panels. For more information:  info@wanit.co.uk

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Vitus 979 Kas (Digital) Yellow lettering

Have to say that I have not actually seen this version in the flesh, but have now had several requests for this set, but with yellow top tube lettering. For more information:  info@wanit.co.uk

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Vitus 979 Carbone 9 Kas V1

Full set including Mavic decal set of era, as seen on some Vitus bikes during the 80's and early 90's when carbon was becoming popular. This version features the Vitus top tube decals in yellow with no black edging and the 'peloton' is in blue and yellow. For more information:  info@wanit.co.uk

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Vitus 979 Carbone 9 Kas V2

Full set including Mavic decal set of era, as seen on some Vitus bikes during the 80's and early 90's when carbon was becoming popular. This version features the Vitus top tube decals in yellow with a black edge and the 'peloton' is in black and yellow.For more information:  info@wanit.co.uk

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Vitus Carbone Kevlar V3

Set includes, top tube, seat tube, down tube, forks, head tube, tubing decal. Team colours only. Seen here on a red background which is not included.

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.