!
!

MAVIC

Please see 'wheel rim application' details for fitting and cleaning

!

Mavic printed rim decals x 4

Each sized at 41 x 15 mm, set of 4

 Please see 'wheel rim application' details for fitting and cleaning

Mavic CX 18

Printed onto gold foil, available in 1 set or more economical 2 sets

 Please see 'wheel rim application' details for fitting and cleaning

Mavic GEL 280

Classic Mavic GEL 280 set. These were tubular rims of the lightest type, generally used in the mountains, but for lighter riders only! Also used by top time trial riders.

Please see 'wheel rim application' details for fitting and cleaning

Mavic G.E.L 280 (red)

Printed onto gold foil, rarer and slightly older version of the G.E.L 280  rim decal. Set includes as pictured.

 Please see 'wheel rim application' details for fitting and cleaning

Mavic GL 330

Classic Mavic GL 330, the lighter version of the GP4, used by all riders including top pro's.

 Please see 'wheel rim application' details for fitting and cleaning

Mavic G.L. 330 (red label)

Tubular rim from the late 80's a lighter version than GP4's. Digitally re=produced and printed onto gold foil.

Please note, fitting instructions are included and should be followed carefully. These are hard anodised rims and even when new the decals tended to peel very quickly (please see additional pictures)

 Please see 'wheel rim application' details for fitting and cleaning  

Mavic GP4 (Red version)

Classic Mavic GP4, printed onto gold foil. Set includes as picture.

 Please see 'wheel rim application' details for fitting and cleaning

Mavic GP4

The choice of many, rough, tough and reliable. As picture, 2 sets for 2 rims

 Please see 'wheel rim application' details for fitting and cleaning

Mavic MA 2 (red) x 2

Classic MA 2, printed onto gold foil. Set includes 2 x picture

Mavic MA 2 Argent

Classic MA 2 Argent, these were double eyeletted rims, in 700c or 27 x 1 1/4. Other versions had only MA 2 without the word 'Argent', bit of a mystery with this one, maybe a mistake by Mavic? Price is for a pair (as picture)

There was also a slightly more modern version which I have not reproduced as yet!

  Please see 'wheel rim application' details for fitting and cleaning

Mavic MA3 x 2

Mavic MA3 UB Control Made in France 6106 622x15. Set includes 2 x picture. Suitable for 32 and 36 hole rims.

NB this is a one piece decal and will need to be fitted to a rim that has not been built (no spokes). I have however successfully split this decal with a pair of scissors to be retro-fitted to a built wheel, you just need to be careful to join up the two halves accurately.

 Please see 'wheel rim application' details for fitting and cleaning

Mavic MA 40 (Red version)

Classic Mavic MA40, printed onto gold foil. Set includes as picture.

  Please see 'wheel rim application' details for fitting and cleaning

Mavic MA 40 (green)

Price is for 1 set (as pictured), more recent version of MA 40. Includes EMR7 labels

 Please see 'wheel rim application' details for fitting and cleaning

Mavic SSC (Red version)

Classic Mavic Paris Roubaix SSC, printed onto gold foil. Set includes as picture.

 Please see 'wheel rim application' details for fitting and cleaning

Mavic Module "E" x 2

Printed onto gold foil, more recent version of the Module "E", available in 700 c version only.

  Please see 'wheel rim application' details for fitting and cleaning

Mavic Module "E" red label

Printed onto gold foil, rarer and slightly older version of the Module "E" rim decal. Set includes as pictured.

Mavic Monthlery route (Not RED version)

Used by many as the 'go to' training rim, quality at an affordable price!

 Please see 'wheel rim application' details for fitting and cleaning

Mavic Monthlery Legere (Red) x 2

Classic Mavic Monthlery Legere (Light), printed onto gold foil. Set includes 2 x picture

 Please see 'wheel rim application' details for fitting and cleaning

Mavic Monthlery Pro (Red)

Printed onto gold foil, price is for 2 (as picture)

  Please see 'wheel rim application' details for fitting and cleaning

Mavic Monthlery Route (Red)

Classic Mavic Monthlery Route, red label. Printed onto gold foil. Set includes 1 x picture

 Please see 'wheel rim application' details for fitting and cleaning

Mavic Open SUP

Classic Mavic Open SUP. Set is for a pair (as shown). Please note, the original SUP lettering was printed onto a clear film with small silver lettering. It is not possible to produce these, nor would it be possible to retro fit them as they were applied to the rim before the spoke eyelet, so this is all I can offer. I have split the Mavic/Open sup to make fitting possible even for rims that are built into wheels. The SUP lettering has a small indent to fit around the spoke eyelet.

 Please see 'wheel rim application' details for fitting and cleaning

Mavic Paris Roubaix SSC

Made in France, S.S.C. Special Service de Courses, "EMR7" Stainless Steel Eyelet Hard Anodised Treatment 650V,

Set includes as picture, for 2 rims.

Please note, these will need to be fitted to rims that have not been built into wheels as the main decal is solid with a hole for the spoke eyelet. I have however successfully split these with a pair of scissors and joined them around the spoke eyelet, but this does need more care.

 Please see 'wheel rim application' details for fitting and cleaning

Mavic OR 7

Printed onto gold foil, price is for 2

 Please see 'wheel rim application' details for fitting and cleaning

Mavic decal

Not strictly just a wheel decal, but as that is what they do most of! Price is for 1 pair (2 decals) each measuring 45 x 9.5 mm.

 Please see 'wheel rim application' details for fitting and cleaning

Mavic vintage rims x 2

Some of the finest rims ever produced. Remember the SSC'S, GP4's and Gel 330's? Now you can restore your rims to their former glory. Available in white, yellow or black, all with the distinctive Mavic oval in yellow and black. Pictured here in yellow.

Mavic vintage rims V2 x 2

Some of the finest rims ever produced. Remember the SSC'S, GP4's, GEL 280's and GL 330's? Now you can restore your rims to their former glory. Available in white, yellow or black, all with the distinctive Mavic oval in yellow and black (not shown). Pictured here in black. This is V2, price is for a pair.

Mavic very old rim decal x 2

Very old, very rare, Mavic Vintage rim decals. Not sure of the decade, but very old by all accounts. This decal is Black and Red printed onto gold foil (so mirror finish where gold is seen in picture). Depth is 19.5 mm. Available in pairs (2) or in 4's

 Please see 'wheel rim application' details for fitting and cleaning