!
!
!

Jack Spencer Classic

Classic Jack Spencer decals. Stalwart and possible founder of the Clayton Velo in Lancashire.

Set includes 2 x down tube (221 mm x 19 mm), 2 x head tube/seat tube, 4 x world championship stripes.

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Knight

Set includes 2 x downtube (244 x 27 mm), 2 x seat tube (175 x 25 mm), 1 x head (48 x 57 mm). Also includes replica tubing decal (choice of 3)

NB regardless of decal colour, head badge will always be as picture

Major Nichols

Much respected Birmingham builder

Set includes 2 x down tube (269 mm x 25 mm), 2 x head badge, 2 x top tube (Record 118 x 15 mm), 4 x worlds stripes.

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Mercury Cycles

Digitally re-mastered and printed onto quality 70 micron vinyl. Set includes 2 x down tube, 1 x seat tube(full panel), 1 x head, 2 x top tube, plus Reynolds 531 competition tubing set.

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Merlin (UK)

Not to be confused with the other USA version, this one hails from Lancashire UK. Set includes 2 x downtube (300x 27 mm), 2 x seat tube (255 x 23 mm).
Larger picture

Neil Orrell

Classic North Manchester builder, used mainly Reynolds 531, 653, 753. Set includes 2 x down tube (277 mm x 26 mm), 2 x seat tube (195 mm x 18 mm), 1 x headbadge (46 mm x 44 mm)

Bill Nickson

Set includes 2 x downtube (262 x 25 mm), 2 x seat tube (210 x 27 mm), 2 x forks (130 x 17 mm), 1 x head (25 x 54 mm). Also includes replica tubing decal (choice of 3)

Orange P7

Digitally re-created. Set includes 2 x down tube, 2 x seat tube, 1 x headbadge, 2 x top tube, 2 x forks.  

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Orange (clockwork)

Set includes 2 x down tube (162 mm x 28mm), 2 x seat tube (148mm x 29 mm) 2 x top tube (134 mm x 24 mm), 4 x small orange (30 x 34 mm), 1 x head (40 x 50 mm).

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Orange (clockwork) V3

Set includes 2 x down tube (158 mm x 25 mm), 2 x seat tube (144 mm x 22 mm) 2 x top tube (134 mm x 24 mm), 4 x small orange (30 x 34 mm), 1 x head (40 x 50 mm). Similar to my other Clockwork, but slightly different sizes.

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Orange CR16

Set includes 2 x downtube (185 x 25 mm), 2 x P7 (24 x 23 mm), 1 x head (42 x 42 mm).

Pennine (digital)

Classic Pennine decals. Set includes 2 x down tube, 2 x seat tube, 1 x seat tube (worlds). 2 x forks, 531 tubing set.

Other colours available, info@wanit.co.uk

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

Pennine V3

Other version of Pennine decals, these are standard cut vinyl and are available in various colours. Set includes 2 x down tube, 2 x seat tube, 1 x head.
Larger picture

Raleigh

Set includes 2 x down tube (230 mm x 38 mm), 2 x seat tube (150 mm x 25 mm) 1 x headbadge (37 mm x 51 mm). Please note: headbadge is printed and should be treated with care. Best to apply and lacquer over.

Raleigh Castorama Team

Digitally re-mastered and printed onto quality 70 micron vinyl. Only 'team' colours available. Complete with head badge and relevant tubing set for this frame. There are so many versions of this floating about, with slightly differing artwork, names on top tube such as Lauren Fignon, 653, 753, Dynatec......

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Larger picture

Raleigh Banana

Team colours only
Set includes 2 x down tube (150 mm x 25 mm), 2 x seat tube (150 mm x 25 mm) 1 x headbadge (37 mm x 51 mm), 2 x top tube (233 mm x 21 mm). Please note: headbadge is printed and should be treated with care. Best to apply and lacquer over. All decals will come on application tape, in separate colours.

Raleigh Chopper

Classic 70's bike. Set includes 2 x down tube (282 mm x 29 mm), 1 x seat tube(163 mm x 34 mm), 1 x chainguard (305 x 29 mm),1 x head badge (34 mm x 47 mm), 2 x forks (22 x 31 mm).

Raleigh Dyna-Tech

Set includes 2 x down tube (187 mm x 30 mm), 2 x Dyna-Tech (170 mm x 13 mm), 2 x Titanium (95 x 9 mm),1 x head badge (34 mm x 47 mm), 2 x forks (22 x 31 mm).

Raleigh Pursuit

Set includes 2 x down tube (166mm x 25 mm), 2x seat tube (166 mm x 25 mm), plus tubing decal of choice
Larger picture

Raleigh RSW 16

Set includes 2 x RSW 16 (170 mm x 27 mm), 1 x seat tube (180 mm x 27 mm), 1 x chainguard (110 x 18 mm) 1 x headbadge (37 mm x 51 mm). Please note: headbadge is printed and should be treated with care. Best to apply and lacquer over.
Larger picture

Raleigh 20

Set includes 2 x down tube (201 mm x 27 mm), 4 x verticals (20 mm x 100 mm) 

Ribble (early) steel

Earlier version with alternative font (different supplier?). This set includes 2 x down tube, 2 x seat tube plus standard head badge
Larger picture

Ribble (steel frame)

Set includes 2 x downtube (203 x 25 mm), 2 x seat tube (169 x 23 mm), 1 x headbadge (36 x 41mm), 2 x seat stays (103 x 14 mm). Check out my 'tubing' page for appropriate decal.

Ribble 653

Slightly more recent version with alternative font (different supplier?). This set includes 2 x down tube, 2 x seat tube, 2 x forks plus alternative head, either small vertical or normal head badge depending on which they had available I think. Also includes 653 tubing decal set (1 x seat, 2 x forks)
Larger picture

Roberts

Set includes 2 x down tube (201 mm x 30 mm), 2 x seat tube (161 mm x 24 mm), 1 x headbadge (50 mm x 51 mm)
Larger picture

Rory O'Brien

Set includes 2 x down tube (180 mm x 30 mm), 2 x seat tube (149 mm x 25 mm).

Saba

Digitally re-mastered and printed onto quality 70 micron vinyl. Set includes 2 x down tube, 1 x seat tube (as head), 1 x head, plus Columbus tubing set.

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

POWDER COATING:
I would advise against using these decals on a frame that has been powder coated unless this has been applied by a professional company who understand cycle frames and not the type who simply do 'iron gates'. Powder coating is without doubt a very tough finish, but can be difficult to adhere to, especially matt finishes. Best to apply to a stove enamelled frame, by an experienced frame sprayer.

Saracen Trekker

Re-live the memories!
Classic frame from the late 80's. Set includes:  2 x down tube 200 x 25 mm, 2 x top tube (160 x 26 mm). There are several versions of this design, I only have this one.

Swinnerton

Famous Midlands shop, with a super talented family of racers. Set includes 2 x down tube (235 mm x 28 mm), 2 x seat tube (160 mm x 18 mm). Many frames were built in 531, but others were made, chose from a selection of replica tubing decals.
Larger picture

Viking

Set includes 2 x down tube (147 mm x 44 mm), 2 x seat tube (100 mm x 30 mm).
Larger picture

Viscount

Re-live the memories!
Set includes 2 x down tube (244 mm x 28 mm), 2 x seat tube (195 mm x 23 mm). Decals are choice of colour with a clear background
Larger picture

Walvale

Set includes 2 x down tube (210 mm x 26 mm), 2 x seat tube (180 mm x 25 mm).

Joe Waugh

Set includes 2 x downtube (170 x 32 mm), 2 x seat tube (225 x 35 mm), 2 x forks (140 x 35 mm), 1 x head (43 x 60 mm). Also includes replica tubing decal (choice of 3)

Whitcomb Classic

Classic Whitcomb decals. From the school of Harry Quinn, not a huge amount is known about Bill Whitcomb, based on fact anyway. Many rumours abound on the internet. Basically Bill spent most of his career working with other frame builders, or building for local bike shop's, but built some classy frames in his own name.

Not to be confused with London builder Barrie Witcomb!

Set includes: 2 x down tube (160 x 20 mm), 2 x seat tube (164x 30 mm), 2 x forks (90 x 16 mm), 1 x headbadge (30 x 45 mm). Many frames were built in 531, and this set comes with replica tubing decal.

Witcomb

Not to be confused with the Liverpool builder, Billy Whitcomb

Set includes 2 x down tube (250 mm x 25 mm), 2 x seat tube (185 mm x 20 mm), 2 x top tube, 1 x printed head badge (45 x 61 mm), 1 x under seat post rear seat tube (30 x 45 mm).  Also available is a  replica Reynolds decal of your choice. As far as I am aware, Witcomb built entirely with Reynolds, but Columbus or others may have been used. If you require a different tubing decal please contact me info@wanit.co.uk for availability.

Larger picture

Woodrup

Set includes 2 x down tube (230 mm x 27 mm), 2 x seat tube (191 mm x 32 mm). Please note: the transfers have a printed black keyline and should be treated with care. Best to apply and lacquer over.
Larger picture

Woodrup (version 2)

Set includes 2 x down tube (230 mm x 25 mm), 2 x seat tube (191 mm x 28 mm).

Woodrup V3

More recent version used by Woodrup. Digitally re-produced and printed onto quality viny, set includes 2 x down tube (207 x 28 mm), 2 x top tube (115 x 15 mm), 1 x head tube (49 x 37 mm), 1 x seat, as head (49 x 37 mm). Available in other colours, if yours is not listed info@wanit.co.uk

Dave Yates V1

Classic North East builder. Set includes 2 x down tube (256 x 28 mm), 2 x top tube (125 x 14 mm), 1 x head (43 x 41 mm), 1 x seat (as head 43 x 41 mm). Tubiing decal of choice also available.

Dave Yates V2 (digital)

Classic North East builder. Digital version, printed white with black outlines. Set includes 2 x down tube (224 x 28 mm), 2 x top tube (112 x 14 mm), 1 x head (43 x 41 mm), 1 x seat (as head 43 x 41 mm). Tubiing decal of choice also available. Can also be produced in other colours info@wanit.co.uk